Getting your fork serviced at a shop can be fairly darn expensive and can leave you without a bike for a while. Luckily, performing a fork lowers service (about 80% of fork services) yourself is pretty easy with a few cheap tools. 

This seal driver can be used to install flangeless seals in your fork lowers. The driver shaft ensures the seal is installed straight and the outer lip ensures the seal is installed to the correct depth. We've included a a size on the top of the driver as well as a taper to make it as easy as possible to get the seal onto the driver. 

These drivers are manufactured in-house. As a result of the manufacturing method we use, the surface has small ridges but they will not damage the fork seals. 

Please note that when putting the seal onto the driver you need to remove the spring so that seal can flex over the driver. Once you've done that just push the seal up the driver until it's flush with the driving surface.