Here's 2m of 1.1mm Stainless Steel Shift Cable made by Jagwire. It is suitable for SRAM and Shimano setups. It's been pre-stretched, so it doesn't stretch as much for you, and it's surface has been smoothed to ensure your shifting is low friction. On top of that, it's stainless steel so it won't corrode. Also included is two cable end caps - just in case. You even get to choose what colour they are! :)

Read more less

Here's some Jagwire 4mm Slick-lube gear housing, suitable for SRAM and Shimano setups. In the centre is a long lasting slick lubricant that reduces shifting friction and reduces water penetration. Encompassing that are strands of wire which reduce the chance of the housing kinking and messing up your shifting. All of this makes for a low friction and long lasting gear housing! We sell this in 2m and 10m lengths. 2m will do a long cable for all non-tandem bikes (except extra extra extra long bikes). 10m is slightly cheaper per metre, but you also get much better usage of cable (less wastage, so even cheaper again). And to top it off, we include some ferrules for your cable. If you need some more ferrules, have a look here. Offcuts: The 50 metre rolls we purchase aren't quite 50 metres after all... Instead of binning the small bit at the end, we offer it for you to purchase. We don't stock these lengths as standard, it's only if a bit is cut off. A 1-1.5m offcut will be somewhere between 1m and 1.5m long, the same is true for other lengths of offcuts. Please don't email us asking when we will have offcuts in stock next 😅 Other notes: Gear housing comes in 4mm and 5mm diameters. You can use either as long as you use the right ferrules! This cable is 4mm in diameter since it is most common Your housing may need a few days to relax after being opened, it may have been stored in a circle for a while...

Read more less

Here's 2m of 1.5mm Stainless Steel Brake Cable made by Jagwire. It is suitable for SRAM and Shimano setups. It's been pre-stretched, so it doesn't stretch as much for you, and it's surface has been smoothed to ensure your shifting is low friction. On top of that, it's stainless steel so it won't corrode. Also included is two cable end caps - just in case. You even get to choose what colour they are! :) We offer two types of brake cables Road and MTB. The difference between the two is the shape of cable head. Below is an image which you can use to decide which type you need. 

Read more less

DMR Deathgrips are our favorite grips because of their waffle pattern and knurling that provide excellent grip. Additionally, they feature a mushroom on the inner side for added comfort. If you have large hands or prefer a softer grip, choose the thicker version. However, if you prefer a more direct feel of your front wheel, opt for the thinner version. We offer both flanged and flangeless versions of Deathgrips; this is the flangeless version. Fancy a bling pair? Pay a little extra and get custom colour collars!

Read more less

Rock that custom colour scheme with 1.8mm cable end caps in a variety of colours 😊

Read more less

DMR Deathgrips are our favorite grips because of their waffle pattern and knurling that provide excellent grip. Additionally, they feature a mushroom on the inner side for added comfort. If you have large hands or prefer a softer grip, choose the thicker version. However, if you prefer a more direct feel of your front wheel, opt for the thinner version. We offer both flanged and flangeless versions of Deathgrips.  This is a pair of refill grips. They do not come with collars, you will need to use your own collars from your last pair :) 

Read more less

Sick of cable rattle inside your frame? Here's some tubing which fits over your internal cables and will stop them from rattling inside your frame. This tubing is 1m long, has an internal diameter of 5mm and an outer diameter of 10mm. If you order more than one unit, we will provide a length equal to the number of units. E.g. 2x units is 2m. This will allow you to get better use of the available tubing :)  Things to Note: A lot of bikes will require more than 1m so have a measure up first to decide how much you need before buying This tubing fits 4mm & 5mm cable well (almost all cables) It's worth looking at your cable entrances to assess suitability - some frames have extremely narrow cable entrances that you can't squish this through

Read more less

DMR Deathgrips are our favorite grips because of their waffle pattern and knurling that provide excellent grip. Additionally, they feature a mushroom on the inner side for added comfort. If you have large hands or prefer a softer grip, choose the thicker version. However, if you prefer a more direct feel of your front wheel, opt for the thinner version. We offer both flanged and flangeless versions of Deathgrips; this is the flanged version. Fancy a bling pair? Pay a little extra and get custom colour collars!

Read more less

Fan of DMR Deathgrips? Why not bling them out with some custom collars? Not compatible with deathgrip 2.

Read more less

We've been using Fabric Gnurl Gravel tape for a few years now and we're fans. We decided to see whether we could source a "similar" tape and here it is. We're not sure that we can tell the difference. Features: 3.5mm foam-backed for maximal vibration damping on-road and off-road Non-slip knurled texture which is grippy in all weather Includes 2x bar plugs Length: 200cm. If you're on extra-wide drop bars it should be enough but you may not be able to run a large overlap It's also very similar to BBB GravelRibbon gel bar tape. You can read a review about this tape here.  Alloy bar plugs: If you'd like an extra clean bar plug, which is more durable and less likely to come out when crashing, consider adding a couple of alloy bar plugs. They should last the life of the bike, use them each time you re-tape.  Performance Guarantee Put simply, this bar tape is solid. We will refund you if you disagree. Easy as. Just let us know if you’re unsatisfied and we’ll sort the rest. Further details about the Performance Guarantee can be found here.

Read more less

DMR Sect bike grips are the perfect Park, Street and Dirt jump grip. They have a classic mushroom design and added a thumb patch where previous mushroom grips wear-out first.

Read more less

Transition from plastic bar plugs to a more elegant solution. These fit all drop bar bikes and won't fall out when you crash. They aren't as shiny as the image suggests! 

Read more less