If there's any tool set you need in the garage it's a reasonable set of Hex Wrenches. This nine piece set of hex wrenches covers all your bases from 1.5mm to 10mm. Each wrench has a ball driver tip on the long side, and its short side is nicely chamfered so it slids into bolt heads easily.  The set contains wrenches of the following sizes: 1.5mm, 2mm, 2.5mm 3mm, 4mm, 5mm 6mm, 8mm, 10mm

Read more less

Got a brake hose which needs shortening? You'll need to get yourself an Olive & Connector to put the brake hose back into your brake lever. Here's an insert and olive that fits Tektro and TRP brakes. Technically, this is the 5.5 mm size, which works for older TRP and Tektro hydraulic brake systems. If you need 5.0 mm inserts (TRP DH-R EVO, E-MTB, Quadiem, Slate T4) please reach out to discuss.  It's worth having a hose clamp to help out with installing the needle, you can grab one here.

Read more less

These Spiral Rubber Frame Protectors reduce and dampen vibration noise caused by the cables vibrating against the frame. They are made of a soft silicone which is good at staying put will significantly reduce any cable rub.  These Protectors are about 6cm long and a large enough diameter to fit around one cable. We tried tying two cables together with these but sadly the protector fell off, a different solution is required for that.     

Read more less

Loctite 243 is a medium strength threadlocker which stops bolts from rattling loose on your bike. We use it on our pivot bolts to make sure the back end of our bike doesn't go all floppy. Super handy for any bike - almost all bolts become loose eventually...

Read more less

Brake pads are the most regularly replaced part of a mountain bike. Sadly, pads tend to be expensive and perform well OR cheap and perform poorly. These pads are different: they perform well at a reasonable price. These brake pads are for brakes which fit Magura MT2 pads. A list of brake models these pads are compatible with can be found on the tab above. We spent months testing a bunch of different brake pads under fifteen accomplished riders to find brake pads which perform well at a great price. Our favourite pads were Frictive pads and these were a close second. Where Frictive doesn’t offer a pad shape we’ve decided to offer these - just to provide a wider range for older and less common brake models. Our test riders found the performance of these pads comparable to the big name brands you know and love. We named these pads GPVN which stands for "Great Price, Very Nice" - a name which really amuses us. Performance Guarantee: Put simply, these pads perform well. We will refund you if you disagree. Easy as. Just let us know if you’re unsatisfied and we’ll sort the rest. Further details about the Performance Guarantee can be found here.Notes: Descriptions of the performance differences between pad compounds and answers to some frequently asked questions can be found on the tabs above We recommend that you try both pad compounds to get a feel for the differences so you can make an informed choice about your preferred compound. Even at downhill World Cups, different riders use different compounds as it's a personal preference. We’re excited to be able to offer these pads at prices that make personal pad testing possible for more riders! FAQ Do I need Fins?Probably not. Finned pads decrease the chance of fade in really heavy braking situations. Brake fade is the reduction in stopping power that occurs when brakes are very hot. Finned pads increase the convective surface area (the area exposed to air flow) of your braking system. An increased convective surface area increases the rate of heat dissipation, which in turn decreases the temperature that your brakes run at for a given amount of braking. A lower temperature for a given amount of braking means that fins decrease brake fade. Additionally, lower operating temperatures reduce the wear rate of the pads. That is to say that fins can improve hot braking performance and decrease pad wear. But unless you experience brake fade, fins will not improve your braking performance noticeably. Most riders will never experience brake fade and thus will not benefit from finned pads. The slightly decreased wear rate of finned pads does not justify the large cost difference. Even the most experienced riders in our test group felt no need to “upgrade” to finned pads. What compound should I run on an e-bike?E-bikes are like normal bikes except they are roughly 10kg heavier. In terms of braking requirements, there is no difference between riding an e-bike and riding a normal bike after eating 10kg of pies. Contrary to what marketing may tell you, e-bikes don't require any special brake pad materials or rotor type. We suggest you try Resin pads and Metallic pads to get a feel for the differences and then make a decision based on your own experiences. Refer to the “Compound Differences” tab for more information. Compatibility Magura:- MT2, MT4, MT6, MT8 Compound Differences PowerResin tend to have slightly more bite when cold than Metallic. Metallic perform better at higher temperatures, i.e. very long descentsModulationResin have a progressive feel whereas Metallic are more on/off. It is easier to crawl down steep things without skidding with ResinDurabilityFor a given amount of riding you would use roughly 3 pairs of Resin pads to each pair of MetallicNoiseResin are very quiet, Metallic are always a bit noisier. At high temperatures, or in the wet, Metallic sometimes screech (you know the sound)Wet ridingMetallic tend to outperform Resin in the wetFadeBrake fade is the reduction in stopping power that occurs when brakes are very hot. Resin tend to fade at lower temperature than Metallic. That said, with these Resin pads we haven't been able to get fade in any situation - including the infamous Mt Oxford descent! Rotor Wear RateResin pads cause lower wear to your rotor than Metallic padsTotal Ongoing CostsEven after accounting for the lower rotor wear rate from Resin pads, Metallic pads will cost you about half as much as Resin pads in the long term for total brake maintenance costs Maximizing Performance To maximize the braking force from new pads it is important to bed them in systematically. It is tempting to forgo this step, but this will leave performance on the table. 'Just riding' a new pair of pads results in inferior braking compared to intentionally bedding in those same pads. A good bedding in process transfers an even layer of brake pad material to the rotor. Pad material transferred to the rotor generates more friction with the pad than the rotor material does. Think about the difference between two grippy surfaces touching versus two slick surfaces. Bedding in your pads creates the best possible match between your pad and rotor surfaces. Which in turn maximizes braking force. PROCEDURE1) Clean your rotor with a non-residual cleaner like isopropyl alchohol (you can forgo this step if you don’t have any around)2) Install pads3) Install wheel4) Pedal bike up to speed and apply your brakes with a consistent pressure (gently at first is best).5) Take off brakes before you stop. Stopping fully ends up causing an uneven transfer of pad material6) Repeat steps 4-5 ten to twenty timesIt always surprises us how different the brakes feel after we’ve gone through this process. We do this on a downhill road (ideally at the top of a chairlift ;) ). Stops us having to pedal up to speed a bunch of times, which can make for a serious puff-fest!

Read more less

Need to remove or tighten a bottom bracket? One of these will do the trick. Depending on your bike there are a few variations so have a careful read of the information below Shimano tool: Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45mm including: Nearly all Shimano Hollowtech II bottom brackets Threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope™, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others 16-notch disc brake rotor lockrings Adaptors: You might need an adaptor to suit some bottom brackets:  BB9000 Adaptor: If you have a XTR BB93, Dura-Ace BB9000 or Dura-Ace BB9100 you will need the BB9000 adaptor. These bottom brackets have a major (outer) diameter of 39-40mm. BBR60 Adaptor: If you have an Ultegra BBR60 or Deore XT MT800 bottom bracket get the BB9R60 adaptor. These bottom brackets have a major (outer) diameter of 41-42mm. With these Shimano bottom brackets you will find the part number written on the outer shell.If you only need an adaptor, click here. Crank Preload tool: If you need one of these bottom bracket wrenches, there is a good chance you have Shimano Hollowtech II cranks. In this case you’ll want a shimano Crank Preload tool too. This is to tighten and loosen the funny looking plastic cap on the end of your left side crank.If you only need an adaptor, click here. Centerlock rotors: This is also the primary tool to for removing/installing centerlock rotors. Double check that your adapters use this interface before purchasing though, they also come in a cassette tool format.

Read more less

Brake pads are the most regularly replaced part of a mountain bike. Sadly, pads tend to be expensive and perform well OR cheap and perform poorly. These pads are different: they perform well at a reasonable price. These brake pads are for brakes which fit Avid BB5 pads. We spent months testing a bunch of different brake pads under fifteen accomplished riders to find brake pads which perform well at a great price. Our favourite pads were Frictive pads, a new local brand. Our test riders found the performance of these pads comparable to the big name brands you know and love. We are stoked to finally see a NZ brand offering good pads and trying to address the generally overpriced market for braking products, it’s something we can fully get on-board with. Performance Guarantee: Put simply, these pads perform well. We will refund you if you disagree. Easy as. Just let us know if you’re unsatisfied and we’ll sort the rest. Further details about the Performance Guarantee can be found here.Notes: Descriptions of the performance differences between pad compounds and answers to some frequently asked questions can be found on the tabs above We recommend that you try both pad compounds to get a feel for the differences so you can make an informed choice about your preferred compound. Even at downhill World Cups, different riders use different compounds as it's a personal preference. We’re excited to be able to offer these pads at prices that make personal pad testing possible for more riders! FAQ Do I need Fins?Probably not. Finned pads decrease the chance of fade in really heavy braking situations. Brake fade is the reduction in stopping power that occurs when brakes are very hot. Finned pads increase the convective surface area (the area exposed to air flow) of your braking system. An increased convective surface area increases the rate of heat dissipation, which in turn decreases the temperature that your brakes run at for a given amount of braking. A lower temperature for a given amount of braking means that fins decrease brake fade. Additionally, lower operating temperatures reduce the wear rate of the pads. That is to say that fins can improve hot braking performance and decrease pad wear. But unless you experience brake fade, fins will not improve your braking performance noticeably. Most riders will never experience brake fade and thus will not benefit from finned pads. The slightly decreased wear rate of finned pads does not justify the large cost difference. Even the most experienced riders in our test group felt no need to “upgrade” to finned pads. What compound should I run on an e-bike?E-bikes are like normal bikes except they are roughly 10kg heavier. In terms of braking requirements, there is no difference between riding an e-bike and riding a normal bike after eating 10kg of pies. Contrary to what marketing may tell you, e-bikes don't require any special brake pad materials or rotor type. We suggest you try Resin pads and Metallic pads to get a feel for the differences and then make a decision based on your own experiences. Refer to the “Compound Differences” tab for more information. Compound Differences PowerResin tend to have slightly more bite when cold than Metallic. Metallic perform better at higher temperatures, i.e. very long descentsModulationResin have a progressive feel whereas Metallic are more on/off. It is easier to crawl down steep things without skidding with ResinDurabilityFor a given amount of riding you would use roughly 3 pairs of Resin pads to each pair of MetallicNoiseResin are very quiet, Metallic are always a bit noisier. At high temperatures, or in the wet, Metallic sometimes screech (you know the sound)Wet ridingMetallic tend to outperform Resin in the wetFadeBrake fade is the reduction in stopping power that occurs when brakes are very hot. Resin tend to fade at lower temperature than Metallic. That said, with these Resin pads we haven't been able to get fade in any situation - including the infamous Mt Oxford descent! Rotor Wear RateResin pads cause lower wear to your rotor than Metallic padsTotal Ongoing CostsEven after accounting for the lower rotor wear rate from Resin pads, Metallic pads will cost you about half as much as Resin pads in the long term for total brake maintenance costs Maximizing Performance To maximize the braking force from new pads it is important to bed them in systematically. It is tempting to forgo this step, but this will leave performance on the table. 'Just riding' a new pair of pads results in inferior braking compared to intentionally bedding in those same pads. A good bedding in process transfers an even layer of brake pad material to the rotor. Pad material transferred to the rotor generates more friction with the pad than the rotor material does. Think about the difference between two grippy surfaces touching versus two slick surfaces. Bedding in your pads creates the best possible match between your pad and rotor surfaces. Which in turn maximizes braking force. PROCEDURE1) Clean your rotor with a non-residual cleaner like isopropyl alchohol (you can forgo this step if you don’t have any around)2) Install pads3) Install wheel4) Pedal bike up to speed and apply your brakes with a consistent pressure (gently at first is best).5) Take off brakes before you stop. Stopping fully ends up causing an uneven transfer of pad material6) Repeat steps 4-5 ten to twenty timesIt always surprises us how different the brakes feel after we’ve gone through this process. We do this on a downhill road (ideally at the top of a chairlift ;) ). Stops us having to pedal up to speed a bunch of times, which can make for a serious puff-fest!

Read more less

This chain breaker comes with a spare pin and works with all types of bike chains except for super wide 5/32” single speed chains - but you probably don’t have one of these. With its comfy rubber handle (trust us, small steel handles suck), we think this chain breaker does just the trick.

Read more less

Got a brake which needs shortening? You'll need to get yourself an Olive & Connector to put the brake hose back into your brake lever. Here's an insert and olive which fits Magura brakes. It's worth having a hose clamp to help out with installing the needle, you can grab one here.

Read more less

Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived! The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted. V11 is fully rebuildable with the dedicated V11 service kit, guaranteeing ride after ride with no-nonsense performance. Features:• Durable glass reinforced nylon body.• Large platform area 105mm x 105mm.• Low profile body with concave foot bed.• Tuneable pins with outer Moto Pins for serious grip.• Strong 4140 Cro-mo black steel axles (9/16") with 6mm hex key fitting.• Fully serviceable for long life.• Weight 450g/pair.• Colours: Black, Blue, Green, Orange, Purple, Red, Turquoise, Yellow.

Read more less